RADIATOR REMOVAL/INSTALLATION [MZI-3.7]
id0112d3801400
1. Disconnect the negative battery cable.
2. Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT [MZI-3.7].)
3. Remove the air cleaner and fresh air duct component. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZI-3.7].)
4. Remove the cooling fan component. (See COOLING FAN COMPONENT REMOVAL/INSTALLATION [MZI-3.7].)
5. Disconnect the ATF oil cooler hose from the radiator. (See OIL COOLER REMOVAL/INSTALLATION [AY6A-EL, AY6AX-EL].)
6. Remove in the order indicated in the table.
7. Install in the reverse order of the removal.
8. Refill the engine coolant. (See ENGINE COOLANT REPLACEMENT [MZI-3.7].)
9. Inspect for engine coolant leakage. (See ENGINE COOLANT LEAKAGE INSPECTION [MZI-3.7].)
10. Inspect the ATF level. (See AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION [AY6A-EL, AY6AX-EL].)
ac9wzw00002935
|
1
|
Coolant reserve tank hose
|
2
|
Lower radiator hose
|
3
|
Oil cooler water hose
|
4
|
Upper mount rubber bracket
|
5
|
Upper mount rubber
|
6
|
Radiator
(See Radiator Removal Note.)
|
Upper Mount Rubber Bracket Removal Note
1. Insert a flathead screwdriver into the upper mount rubber bracket notch.
ac9wzw00002176
|
2. Apply force in the direction shown by the arrow.
ac9wzw00002177
|
Radiator Removal Note
1. Remove the radiator from above the engine compartment.