FRONT AIRFLOW MODE ACTUATOR REMOVAL/INSTALLATION
id074000804600
L.H.D.
1. Disconnect the negative battery cable.
2. Remove the following parts:
- (1) Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)
- (2) Front console box mat (See FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION.)
- (3) Indicator panel (See INDICATOR PANEL REMOVAL/INSTALLATION.)
- (4) Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)
- (5) Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)
- (6) Side wall (See SIDE WALL REMOVAL/INSTALLATION.)
- (7) Console panel (See CONSOLE PANEL REMOVAL/INSTALLATION.)
- (8) Console cover (See CONSOLE COVER REMOVAL/INSTALLATION.)
- (9) Console (See CONSOLE REMOVAL/INSTALLATION.)
- (10) Front scuff plate inner (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
- (11) Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
- (12) Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)
- (13) Bonnet release lever (See BONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION.)
- (14) Lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)
- (15) Lower column cover (See COLUMN COVER REMOVAL/INSTALLATION.)
- (16) Driver-side air bag module (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)
- (17) Steering wheel (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)
- (18) Combination switch (See COMBINATION SWITCH REMOVAL/INSTALLATION.)
- (19) Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)
- (20) Meter hood (See METER HOOD REMOVAL/INSTALLATION.)
- (21) Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
- (22) Audio unit (See AUDIO UNIT REMOVAL/INSTALLATION.)
- (23) Steering shaft (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)
- (24) A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)
- (25) Side panel (See SIDE PANEL REMOVAL/INSTALLATION.)
3. Disconnect the front door wiring harness connector (Driver side). (See FRONT DOOR MODULE PANEL REMOVAL/INSTALLATION.)
4. Disconnect the dashboard harness connectors.
5. Remove the brake switch from the brake pedal with the brake switch connector connected. (See BRAKE PEDAL REMOVAL/INSTALLATION [L.H.D.].) (See BRAKE PEDAL REMOVAL/INSTALLATION [R.H.D.].)
6. Remove the selector lever component. (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION.)
7. Remove the windshield wiper arm and blade. (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION.)
8. Remove the cowl grille. (See COWL GRILLE REMOVAL/INSTALLATION.)
9. Remove the windshield wiper motor. (See WINDSHIELD WIPER MOTOR REMOVAL/INSTALLATION.)
10. Remove the dashboard. (See DASHBOARD REMOVAL/INSTALLATION.)
11. Remove in the order indicated in the table.
|
1
|
Front airflow mode actuator connector
|
|
2
|
Screw
|
|
3
|
Front airflow mode actuator
|
12. Install in the reverse order of removal.
R.H.D.
1. Disconnect the negative battery cable.
2. Remove the following parts:
- (1) Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)
- (2) Front console box mat (See FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION.)
- (3) Indicator panel (See INDICATOR PANEL REMOVAL/INSTALLATION.)
- (4) Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)
- (5) Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)
- (6) Front scuff plate inner (passenger side) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
- (7) Front side trim (passenger side) (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
- (8) Dashboard under cover (passenger side) (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)
- (9) Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)
- (10) Side panel (See SIDE PANEL REMOVAL/INSTALLATION.)
- (11) Dashboad garnish (See DASHBOARD GARNISH REMOVAL/INSTALLATION.)
- (12) Passenger-side air bag module (See PASSENGER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
|
1
|
Front airflow mode actuator connector
|
|
2
|
Screw
|
|
3
|
Front airflow mode actuator
|
4. Install in the reverse order of removal.
