DTC B2477 [INSTRUMENT CLUSTER]
id0902e8840500
|
Description |
Instrument cluster configuration error |
|---|---|
|
Detection condition
|
• Instrument cluster configuration has not been correctly performed.
|
|
Possible cause
|
• Instrument cluster configuration error
• Instrument cluster malfunction
|
Diagnostic procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
PERFORM INSTRUMENT CLUSTER CONFIGURATION
• Perform the instrument cluster configuration using the M-MDS.
• Clear the DTC for the instrument cluster using the M-MDS.
• Retrieve the instrument cluster DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Perform the instrument cluster configuration again, then go to the next step.
|
|
No
|
Go to Step 3.
|
||
|
2
|
VERIFY DTC TROUBLESHOOTING COMPLETED
• Clear the DTC for the instrument cluster using the M-MDS.
• Retrieve the instrument cluster DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Repeat the inspection from Step 1.
• If the malfunction recurs, replace the instrument cluster.
Go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|
||