DTC TABLE [INSTRUMENT CLUSTER]

id0902e8347100

×: Applicable
—: Not applicable

DTC No.

Detection condition

Description

Freeze frame data

Page
B1213*1
•  Only one key is registered
Only one key ID number is registered
—
(See SECURITY LIGHT: 21, DTC: B1213/P1260/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B1342
•  Instrument cluster detects the internal ECU malfunction.
Instrument cluster internal ECU malfunction
—
(See DTC B1342 [INSTRUMENT CLUSTER].)
B1600*1
•  The key ID number data cannot be read
The key ID number data cannot be read
—
(See SECURITY LIGHT: 13, DTC: B1600/P1260/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B1601*1
•  The instrument cluster has detected unregistered key ID number
The instrument cluster has detected unregistered key ID number
—
(See SECURITY LIGHT: 15, DTC: B1601/P1260/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B1602*1
•  The instrument cluster cannot read key ID number data normally
The instrument cluster cannot read key ID number data normally
—
(See SECURITY LIGHT: 14, DTC: B1602/P1260/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B1681*1
•  No detected communication with the coil antenna
No detected communication with the coil antenna
—
(See SECURITY LIGHT: 11, DTC: B1681/P1260/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B2103*1
•  Coil antenna malfunction
•  The PCM determined a malfunction in the coil antenna even though it is normal
•  Coil antenna malfunction
•  The PCM determined a malfunction in the coil antenna even though it is normal
—
(See SECURITY LIGHT: 12, DTC: B2103/P1260/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B2139*1
•  ID number data in the instrument cluster and the PCM are different
ID number data in the PCM and the instrument cluster do not match
—
(See SECURITY LIGHT: 23, DTC: B2139/P1260/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B2141*1
•  Communication error between the instrument cluster and the PCM (data transfer error)
Communication error between the instrument cluster and the PCM (data transfer error)
—
(See SECURITY LIGHT: 22, DTC: B2141/P1260/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B2143*2
•  Two or more codes are overlapping.
ID registration failure
—
(See DTC B2143.)
B2431*1
•  Key ID number registration error
Key ID number registration error
—
(See SECURITY LIGHT: 13, DTC: B2431/P1260/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
B2477
•  Instrument cluster configuration has not been correctly performed.
Instrument cluster configuration error
—
(See DTC B2477 [INSTRUMENT CLUSTER].)
B2868*2
•  The instrument cluster receives error signals from the wheel unit.
Wheel unit No.1 (internal malfunction)
—
(See DTC B2868, B2869, B2870, B2871.)
B2869*2
•  The instrument cluster receives error signals from the wheel unit.
Wheel unit No.2 (internal malfunction)
—
B2870*2
•  The instrument cluster receives error signals from the wheel unit.
Wheel unit No.3 (internal malfunction)
—
B2871*2
•  The instrument cluster receives error signals from the wheel unit.
Wheel unit No.4 (internal malfunction)
—
U0073
•  Instrument cluster detects a CAN bus communication line (HS-CAN) malfunction.
Module communication error (HS-CAN)
—
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D.)].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D.)].)
U0100
•  Instrument cluster cannot receive the CAN signal from the PCM.
Communication error with PCM
×
U0101
•  Instrument cluster cannot receive the CAN signal from the TCM.
Communication error with TCM
×
U0114*3
•  Instrument cluster cannot receive the CAN signal from the 4WD control module.
Communication error with 4WD control module
×
U0121
•  Instrument cluster cannot receive the CAN signal from the DSC/RSC HU/CM.
Communication error with DSC/RSC HU/CM
×
U0127*2
With advanced keyless entry and start system:
•  The instrument cluster cannot receive signal from the keyless control module.
With keyless entry system
•  The instrument cluster cannot receive signal from the keyless receiver.
With advanced keyless entry and start system:
•  Communication failure between instrument cluster and keyless control module
With keyless entry system
•  Communication failure between instrument cluster and keyless receiver
×
(See DTC U0127.)
U0140
•  Instrument cluster cannot receive the CAN signal from the BCM.
Communication error with BCM
×
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (L.H.D.)].)
(See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM (R.H.D.)].)
U0151
•  Instrument cluster cannot receive the CAN signal from the SAS control module.
Communication error with SAS control module
×
U0200*4
•  Instrument cluster cannot receive the CAN signal from the BSM control module.
Communication error with BSM control module
×
U0214*5
•  Instrument cluster cannot receive the CAN signal from the keyless control module.
Communication error with keyless control module
×
U023A*6
•  Instrument cluster cannot receive the CAN signal from the forward sensing camera (FSC).
Communication error with forward sensing camera (FSC)
×
U2023
•  Instrument cluster cannot receive the correct data from the keyless control module. (Vehicles with advanced keyless entry and start system)
•  Instrument cluster cannot receive the correct data from the PCM.
Error data from other module
×
(See DTC U2023 [INSTRUMENT CLUSTER].)
U2064
•  Instrument cluster receives the warning light illumination request signal.
Warning light illumination request signal from other module
×
(See DTC U2064 [INSTRUMENT CLUSTER].)
U2197
•  Instrument cluster receives the invalid vehicle speed from the PCM under the following conditions:
―  Passed 20 s after turn the ignition switch to the ON position
―  Odometer is normal and more than 30 km {19 mile}.
―  Battery voltage is more than 10 V.
―  Received invalid data from the PCM for 0.5 s.
Error signal from PCM
—
(See DTC U2197 [INSTRUMENT CLUSTER].)
U2510*1
•  Communication error between the instrument cluster and the PCM (no response)
Communication error between the instrument cluster and the PCM (no response)
—
(See SECURITY LIGHT: 16, DTC: U2510/P1260/P1260:00 [IMMOBILIZER SYSTEM (KEYLESS ENTRY SYSTEM)].)
U2616*2
•  The keyless receiver has continuously not received a signal from the wheel unit for a certain period.
Wheel unit No.1 (No response)
×
(See DTC U2616, U2617, U2618, U2619.)
U2617*2
•  The keyless receiver has continuously not received a signal from the wheel unit for a certain period.
Wheel unit No.2 (No response)
×
U2618*2
•  The keyless receiver has continuously not received a signal from the wheel unit for a certain period.
Wheel unit No.3 (No response)
×
U2619*2
•  The keyless receiver has continuously not received a signal from the wheel unit for a certain period.
Wheel unit No.4 (No response)
×

*1  :Vehicles with keyless entry system
*2  :Vehicles with tire pressure monitoring system
*3  :4WD
*4  :Vehicles with blind spot monitoring (BSM)
*5  :Vehicles with advanced keyless entry and start system
*6  :Vehicles with forward sensing camera (FSC)