DTC U3003:17 [FORWARD SENSING CAMERA (FSC)]
id0902p9031000
|
Description |
Forward sensing camera (FSC) power supply voltage high input |
|---|---|
|
Detection condition
|
• Forward sensing camera (FSC) power supply circuit voltage is 16.8 V or more for 5 s or more.
|
|
Fail-safe
|
• Inhibits the lane departure warning system (LDWS).
• Inhibits the high beam control (HBC) system.
• Inhibits the forward obstruction warning (FOW) system.
|
|
Possible cause
|
• PCM DTC is are stored.
• Battery malfunction
• Generator malfunction
• Forward sensing camera (FSC) malfunction
|
|
System wiring diagram
|
—
|
Diagnostic procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY PCM DTCs
• Retrieve the PCM DTCs using the M-MDS.
• Are any DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [MZI-3.7].)
|
|
No
|
Go to the next step.
|
||
|
2
|
INSPECT BATTERY
• Inspect the battery.
(See BATTERY INSPECTION [MZI-3.7].)
• Is there any malfunction?
|
Yes
|
Replace the battery, then go to Step 4.
|
|
No
|
Go to the next step.
|
||
|
3
|
INSPECT GENERATOR
• Inspect the generator.
• Is there any malfunction?
|
Yes
|
Replace the generator, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY DTC TROUBLESHOOTING COMPLETED
• Clear the DTC for the forward sensing camera (FSC) using the M-MDS.
• Turn the ignition switch to the ON position and wait for 6.5 s or more.
• Retrieve the forward sensing camera (FSC) DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Repeat the inspection from Step 1.
• If the malfunction recurs, replace the forward sensing camera (FSC).
Go to the next step.
|
|
No
|
Go to the next step.
|
||
|
5
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|
||