DOOR SASH FILM REMOVAL

id091600805200

1.  Partially peel back the glass run channel.

2.  Partially peel back the door weatherstrip.

3.  Remove the following parts:

(1)  Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION.)

(2)  Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)

(3)  Inner sail garnish (See INNER SAIL GARNISH REMOVAL/INSTALLATION.)

(4)  Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION.)

(5)  Front beltline molding (See FRONT BELTLINE MOLDING REMOVAL/INSTALLATION.)

(6)  Rear beltline molding (See REAR BELTLINE MOLDING REMOVAL/INSTALLATION.)

(7)  Front sash molding (See FRONT SASH MOLDING REMOVAL.)

(8)  Rear sash molding (See REAR SASH MOLDING REMOVAL.)

(9)  Rear door garnish (See REAR DOOR GARNISH REMOVAL/INSTALLATION.)

4.  Peel off the rear sash film by pulling it outward from one end.

acxuuw00000914

Note

•  Slowly remove the door sash film since it may tear easily.