ANTENNA FEEDER NO.1 INSPECTION

id092000812400

With Audio System/Car-navigation System (without display)

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Front console box mat (See FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION.)

(2)  Indicator panel (See INDICATOR PANEL REMOVAL/INSTALLATION.)

(3)  Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(4)  Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)

(5)  Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)

(6)  Audio unit (See AUDIO UNIT REMOVAL/INSTALLATION.)

(7)  Front scuff plate inner (RH) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(8)  Front side trim (RH) (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

3.  Disconnect the antenna feeder No.2. (See ANTENNA FEEDER NO.2 REMOVAL/INSTALLATION.)

4.  Verify that the continuity between antenna feeder No.1 terminals is as indicated in the table.

ac9wzw00002762

•  If not as indicated in the table, replace antenna feeder No.1.

ac9wzw00000898

With Car-navigation System (with display)

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Front console box mat (See FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION.)

(2)  Indicator panel (See INDICATOR PANEL REMOVAL/INSTALLATION.)

(3)  Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(4)  Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)

(5)  Car-navigation unit (See CAR-NAVIGATION UNIT REMOVAL/INSTALLATION.)

(6)  Front scuff plate inner (RH) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(7)  Front side trim (RH) (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

3.  Disconnect the antenna feeder No.2. (See ANTENNA FEEDER NO.2 REMOVAL/INSTALLATION.)

4.  Verify that the continuity between antenna feeder No.1 terminals is as indicated in the table.

ac9wzw00002862

•  If not as indicated in the table, replace antenna feeder No.1.

ac9wzw00000898