WHEEL HUB, STEERING KNUCKLE INSPECTION

id031100700200

Warning

•  If the vehicle is driven without ending maintenance mode, it could result in an accident. After performing the maintenance mode work, always end maintenance mode.

Caution

•  When performing the procedure while the vehicle is on the ground, block the front and rear wheels using wheel blocks. Otherwise, the vehicle may move when the electric parking brake is released.

Wheel Bearing Excessive Play Inspection

1.  Switch to the maintenance mode. (See MAINTENANCE MODE.)

2.  Remove the wheel and tire. (See WHEEL AND TIRE REMOVAL/INSTALLATION.)

3.  Remove the front disc plate. (See FRONT BRAKE DISC REMOVAL/INSTALLATION.)

4.  Install the magnet base and dial gauge as shown in the figure and inspect for excess play in the axial direction of the wheel bearing.

am3zzw00026270

•  If it exceeds the maximum specification, replace the wheel bearing. (See WHEEL HUB, STEERING KNUCKLE REMOVAL/INSTALLATION.)

5.  End the maintenance mode. (See MAINTENANCE MODE.)