DTC U3000:16, U3000:28, U3000:49, U3000:61, U3000:64, U3000:72, U3000:73 OR U3000:96 [ELECTRIC POWER STEERING (EPS) CONTROL MODULE]
id0602a6015300
Outline
|
System malfunction location
|
Electric Power Steering (EPS) control module
|
|
|
Detection condition
|
• The on-board diagnostic function detects control module malfunction
|
|
|
Fail-safe
|
• Refer to “Fail-safe Function Table”. (See DTC TABLE [ELECTRIC POWER STEERING (EPS) CONTROL MODULE].)
|
|
|
Possible cause
|
• Internal malfunction of Electric Power Steering (EPS) control module
|
|
|
System wiring diagram
|
Not applicable
|
|
|
Connector diagram
|
Not applicable
|
|
Diagnostic Procedure
|
Step |
Inspection |
Results |
Action |
|---|---|---|---|
|
1
|
INSPECT ELECTRIC POWER STEERING (EPS) CONTROL MODULE FOR MALFUNCTION DEPENDING ON REPEATABILITY
• Using the M-MDS, clear the DTC from the Electric Power Steering (EPS) control module.
(See CLEARING DTC.)
• Using the M-MDS, perform the Electric Power Steering (EPS) control module DTC inspection.
(See DTC INSPECTION.)
• Is the same Pending DTC present?
|
Yes
|
Replace the Electric Power Steering (EPS) control module, then perform the repair completion verification.
|
|
No
|
Go to the next step.
|
||
|
Repair completion verification
|
VERIFY NO DTC IS PRESENT
• Are any DTCs present?
|
Yes
|
Go to applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|