POSITION MEMORY CONTROL MODULE REMOVAL/INSTALLATION

id091300202400

Warning

•  Handling a seat equipped with a side air bag improperly can accidentally operate (deploy) the air bag, which may seriously injure you. Read the service warnings/cautions in the Workshop Manual before handling a seat (side air bag integrated).(See AIR BAG SYSTEM SERVICE WARNINGS [TWO-STEP DEPLOYMENT CONTROL SYSTEM (E)].)(See AIR BAG SYSTEM SERVICE CAUTIONS [TWO-STEP DEPLOYMENT CONTROL SYSTEM (E)].)

1.  Remove the driver's front seat installation bolts. (With power seat)(See FRONT SEAT REMOVAL/INSTALLATION [(E)].)

2.  Switch the main power OFF.

3.  Disconnect the negative lead-acid battery terminal and wait for 1 min or more. (See NEGATIVE LEAD-ACID BATTERY TERMINAL DISCONNECTION/CONNECTION.)

4.  Remove the head restraint.

5.  Remove the front seat under cover. (With power seat)(See FRONT SEAT REMOVAL/INSTALLATION [(E)].)

6.  Remove the driver's front seat.(See FRONT SEAT REMOVAL/INSTALLATION [(E)].)

7.  Disconnect the position memory control module connectors.

a30zzw00002118

8.  Remove the screws and the position memory control module.

9.  Install in the reverse order of removal.