REAR FOG LIGHT INSPECTION [(E)]

id0918007042x2

1.  Disconnect the negative lead-acid battery terminal. (See NEGATIVE LEAD-ACID BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the rear fog light. (See REAR FOG LIGHT REMOVAL/INSTALLATION [(E)].)

3.  Apply lead-acid battery positive voltage to rear fog light terminal A, and connect the ground to terminal B.

a30zzw00001729

4.  Verify that the rear fog light turns on.

•  If the rear fog light does not turn on, replace the rear fog light. (See REAR FOG LIGHT REMOVAL/INSTALLATION [(E)].)