WASHER FLUID-LEVEL SENSOR INSPECTION

id091900702900

1.  Disconnect the negative lead-acid battery terminal. (See NEGATIVE LEAD-ACID BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the front deflector (RH). (See DEFLECTOR REMOVAL/INSTALLATION.)

3.  Verify that the continuity between the washer fluid-level sensor terminals is as indicated in the table.

am3zzw00030715

amxuuw00004689

•  If not as indicated in the table, replace the washer fluid-level sensor. (See WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION.)