DAB ANTENNA AMPLIFIER INSPECTION [(E)]

id0920007033x2

Note

•  The integrity of the DAB antenna amplifier cannot be determined from a single part. When inspecting the DAB antenna amplifier, perform the following procedure.

1.  Connect the M-MDS to the DLC-2.

2.  Perform the DTC inspection for the connectivity master unit (CMU) and verify if any DTCs related to the DAB antenna amplifier is detected. (See DTC INSPECTION.)

•  If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (Refer to the [DTC TABLE [CONNECTIVITY MASTER UNIT]] in the workshop manual)