INSTRUMENT CLUSTER INSPECTION

id092200703900

Speedometer Inspection

1.  Connect the M-MDS to the DLC-2.

2.  After vehicle identification, select the following items from the initialization screen of the M-MDS.

(1)  “Toolbox”

(2)  “Diagnosis”

(3)  “Data Logger”

(4)  “IC”

3.  Using the simulation function SPD_MTR, verify that the values are as indicated in the table.

M-MDS display	Tachometer display
0%	Speedometer needle moves to bottommost position.
20%	Speedometer needle moves to approx. 60 km/h {37 mph}.
40%	Speedometer needle moves to approx. 120 km/h {74.6 mph}.

•  If not as indicated in the table, inspect the related wiring harnesses.

―  If the related wiring harnesses are normal, replace the instrument cluster.(See INSTRUMENT CLUSTER REMOVAL/INSTALLATION [(E)].)