QBC (QUICK BATTERY CHARGE) VOLTAGE SENSOR INSPECTION

id304000100700

Warning

<<High voltage>>

•  Inspections that require installation/removal of the high voltage battery cover cannot be performed because the high voltage battery cannot be disassembled. Perform troubleshooting for DTCs output by the BECM. (See DTC INSPECTION.)

DTC Inspection

1.  Connect the M-MDS to the DLC-2.

2.  Perform the BECM DTC inspection using the M-MDS, and if a voltage sensor related DTC is output, repair the malfunctioning location according to the applicable DTC troubleshooting.

(See DTC INSPECTION.) (See DTC TABLE [BECM (e-SKYACTIV)].)