REFRIGERANT PRESSURE SENSOR No.2 INSPECTION

id304000101200

Warning

<<High voltage>>

•  Inspections that require installation/removal of the high voltage battery cover cannot be performed because the high voltage battery cannot be disassembled. Perform troubleshooting for DTCs output by the PCM and BECM. (See DTC INSPECTION.)

DTC Inspection

1.  Connect the M-MDS to the DLC-2.

2.  Perform the PCM and BECM DTC inspection using the M-MDS, and if an high voltage battery related DTC is output, repair the malfunctioning location according to the applicable DTC troubleshooting.

(See DTC INSPECTION.) (See DTC TABLE [PCM (e-SKYACTIV)].) (See DTC TABLE [BECM (e-SKYACTIV)].)