DRIVE MOTOR CONTROL MODULE INSPECTION

id304000101400

Warning

<<High voltage>>

•  Because the drive motor control module uses a waterproof connector, the inspection for the voltage/wave pattern cannot be performed. Perform troubleshooting for DTC output by the PCM and drive motor control module. (See DTC INSPECTION.)

DTC Inspection

1.  Connect the M-MDS to the DLC-2.

2.  Perform the PCM and drive motor control module DTC inspection using the M-MDS, and if a drive motor control module related DTC is output, repair the malfunctioning location according to the applicable DTC troubleshooting.

(See DTC INSPECTION.) (See DTC TABLE [PCM (e-SKYACTIV)].) (See DTC TABLE [DRIVE MOTOR CONTROL MODULE (e-SKYACTIV)].)