ELECTRIC MOTOR CURRENT SENSOR INSPECTION

id304000101700

Note

•  The electric motor current sensor is built into the inverter.

•  Inverter DTCs are output by the drive motor control module.

DTC Inspection

1.  Connect the M-MDS to the DLC-2.

2.  Perform the drive motor control module DTC inspection using the M-MDS, and if a electric motor current sensor related DTC is output, repair the malfunctioning location according to the applicable DTC troubleshooting.

(See DTC INSPECTION.) (See DTC TABLE [DRIVE MOTOR CONTROL MODULE (e-SKYACTIV)].)