BATTERY CHARGE CONTROL MODULE INSPECTION

id304000102100

Warning

<<High voltage>>

•  Because the battery charge control module uses a waterproof connector, the inspection for the voltage/wave pattern cannot be performed. Perform troubleshooting for DTCs output by the PCM and battery charge control module. (See DTC INSPECTION.)

DTC Inspection

1.  Connect the M-MDS to the DLC-2.

2.  Perform the PCM and battery charge control module DTC inspection using the M-MDS, and if a battery charge control module related DTC is output, repair the malfunctioning location according to the applicable DTC troubleshooting.

(See DTC INSPECTION.) (See DTC TABLE [PCM (e-SKYACTIV)].) (See DTC TABLE [BATTERY CHARGE CONTROL MODULE (e-SKYACTIV)].)