WASHER MOTOR INSPECTION

id091900702600

1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

Warning

• Water sprayed on the battery and ground could cause electrocution. When performing the washer motor inspection, prepare a container to collect washer fluid and be careful not to spray washer fluid.

2. Disconnect the rear washer hose from the washer motor. (See WASHER MOTOR REMOVAL/INSTALLATION.)

3. After connecting washer motor terminal B to the positive battery terminal, and terminal A to ground, verify that washer fluid sprays from the front side of the washer motor.

a30zzw00006489

B+ terminal

Ground terminal

Measurement condition

B

A

Front

B+ terminal	Ground terminal	Measurement condition
B	A	Front

• If there is any malfunction, replace the washer motor. (See WASHER MOTOR REMOVAL/INSTALLATION.)

4. After connecting washer motor terminal A to the positive battery terminal, and washer motor terminal B to ground, verify that washer fluid sprays from the rear side of the washer motor.

a30zzw00006490

B+ terminal

Ground terminal

Measurement condition

A

B

Rear

B+ terminal	Ground terminal	Measurement condition
A	B	Rear

• If there is any malfunction, replace the washer motor. (See WASHER MOTOR REMOVAL/INSTALLATION.)