|
DTC 13
|
ID number is not received.
|
|---|---|
|
POSSIBLE CAUSE |
• No transponder in the key
• Defective transponder in the key (ID number is not output.)
• Defective coil antenna
• Defective instrument cluster
|
Diagnostic procedure
|
STEP
|
INSPECTION
|
ACTION
|
|
|---|---|---|---|
|
1
|
VERIFY DTC USING M-MDS
• Does M-MDSindicate DTC B1600?
|
Yes
|
Go to Step 3.
|
|
No
|
Go to next step.
|
||
|
2
|
VERIFY DTC USING M-MDS
• Does M-MDS indicate DTC B2431?
|
Yes
|
Go to SECURITY LIGHT 13: DTC B2431.
|
|
No
|
Go to next step.
|
||
|
3
|
VERIFY VALID KEY
• Is there any key, other than the one that caused displayed DTC, which can start the engine?
|
Yes
|
Go to Step 5.
|
|
No
|
Go to next step.
|
||
|
4
|
VERIFY WHETHER MALFUNCTION IS IN COIL ANTENNA OR KEY
• Using M-MDS register an additional key.
(See IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING [WITH ADVANCED KEYLESS SYSTEM])
• Using registered key, turn ignition switch to ON position.
• Does M-MDS indicate DTC B1600 again?
|
Yes
|
Replace coil antenna, then go to step 6.
|
|
No
|
• Dispose of defective key.
• Duplicate key if necessary.
|
||
|
5
|
VERIFY WHETHER MALFUNCTION IS IN COIL ANTENNA OR KEY
• Using any other valid key, turn ignition switch to ON position.
• Does M-MDS indicate DTC B1600 again?
|
Yes
|
Replace coil antenna, then go to next step.
|
|
No
|
• Dispose of defective key.
• Duplicate key if necessary.
|
||
|
6
|
INSPECT KEYLESS CONTROL MODULE
• Using registered key, turn ignition switch to ON position.
• Does M-MDS indicate DTC -/B1600 again?
|
Yes
|
Replace keyless control module, then go to next step.
|
|
No
|
DTC troubleshooting completed.
|
||
|
7
|
INSPECT INSTRUMENT CLUSTER
• Using registered key, turn ignition switch to ON position.
• Does M-MDS indicate DTC -/B1600 again?
|
Yes
|
Replace instrument cluster and reprogram immobilizer system.
|
|
No
|
DTC troubleshooting completed.
|
||