NO.10 CD PLAYER DOES NOT PLAY THE AUDIO DATA (CDDA)


10	CD player does not play the audio data (CDDA) Possible DTC:10:Er02, 22:Er02
Troubleshooting hints • CD-R/RW write format is out of specification • Defective CD-R/RW (e.g., dirty CD, scratch) • MP3 applicable CD player is malfunctioning • Data other than audio data is in CD-R/RW Note • The CD player may not play the CD-R/RW properly due to the disc condition. • If there are MP3-formatted files and audio data on the same disc, the CD player loads and plays the first session of the data only.


STEP	INSPECTION		ACTION
1	• Replace with an audio-CD known to be operational. • Does the CD player play the audio-CD properly?	Yes	Go to the next step.
1		No	Replace the audio unit. (See CENTER PANEL UNIT REMOVAL/INSTALLATION.) (See CENTER PANEL UNIT DISASSEMBLY/ASSEMBLY.) (See AUDIO UNIT DISASSEMBLY/ASSEMBLY.)
2	• Inspect the write format of the recorded data on the CD-R/RW. • Is the write format correct?	Yes	Go to the next step.
2		No	Write the CD-R/RW to the correct specification.
3	• Inspect the recorded data in the CD-R/RW. • Is any data other than the audio data recorded on the CD-R/RW?	Yes	Replace with a CD-R/RW known to be operational (record audio data only), then inspect the CD player operation. If the CD-R/RW plays: • Audio system is normal. Explain to the customer that the CD player does not operate properly if audio data or other data are recorded on the CD-R/RW. If the CD-R/RW does not play: • Replace the audio unit. (See CENTER PANEL UNIT REMOVAL/INSTALLATION.) (See CENTER PANEL UNIT DISASSEMBLY/ASSEMBLY.) (See AUDIO UNIT DISASSEMBLY/ASSEMBLY.)
3		No	Go to the next step.
4	• Visually inspect the CD-R/RW. • Is there any dirt or scratches on the CD-R/RW?	Yes	Clean the disc or replace it with an operational CD-R/RW.
4		No	Replace the audio unit. (See CENTER PANEL UNIT REMOVAL/INSTALLATION.) (See CENTER PANEL UNIT DISASSEMBLY/ASSEMBLY.) (See AUDIO UNIT DISASSEMBLY/ASSEMBLY.)