CLEARING CARD KEY [WITH ADVANCED KEYLESS SYSTEM]

1. Fully lower the driver-side door glass.

2. Connect the M-MDS to the DLC-2.

3. Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.

Caution

• Protect the cable and body contact area with a clean rag, otherwise they could be damaged.

4. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• When using the IDS (laptop PC)

1. Select "Body"

2. Select "Security"

• When using the PDS (Pocket PC)

1. Select "Programming"

5. Then, select items from the screen menu in the following order.

1. Select "PATS Functions".

2. Select "Card Key Code Erase".

6. Perform the security access according to the directions on the M-MDS screen. (See SECURITY ACCESS PROCEDURE.)

7. Perform the Card Key Code Erase according to the directions on the M-MDS screen.