KNOCK SENSOR (KS) REMOVAL/INSTALLATION [L8, LF]

id0140i7802900

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L8, LF].)

2.  Remove the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [L8, LF].)

3.  Remove the dynamic chamber. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L8, LF].)

4.  Disconnect the KS connector.

5.  Remove the KS installation bolt, then remove the KS.

e5u140zw5k01

6.  Install in the reverse order of removal.

KS tightening torque
16—24 N·m {1.7—2.4 kgf·m, 12—17 ft·lbf}