DTC TABLE [HANDS-FREE TELEPHONE (HF/TEL) SYSTEM]
id0902g0363000
Screen display |
Malfunction description |
Inferred cause/verified content |
Reference |
---|---|---|---|
DTC (When starting on-board diagnostic function) |
|||
26: Er81
|
HF/TEL function does not operate.
|
CAN system
|
|
26: Er82
|
Sound from microphone not heard
|
Short to power supply in wiring harness between microphone (Input signal) and HF/TEL unit
|
|
26: Er83
|
Sound from microphone not heard
|
Short to GND/power supply in microphone power supply circuit
|
|
26: Er84
|
Call transmission and receiving is impossible
|
Any of the following is detected:
• The microphone power supply circuit is not connected.
• Open circuit in the microphone input circuit
• Microphone input circuit short to body ground
|
|
26: Er85
|
Call transmission and receiving is impossible
|
• Poor contact in the voice recognition/hands-free switch or HF/TEL unit connector
• Voice recognition/hands-free switch malfunction
|
|
26: Er86
|
HF/TEL function does not operate.
|
HF/TEL unit malfunction
|
Replace the HF/TEL unit.
|
no Err
|
—
|
DTC is not recorded.
|
—
|