CLUTCH RELEASE CYLINDER REMOVAL/INSTALLATION

id051000157100

Caution

•  Do not allow clutch fluid to get on a painted surface. Clutch fluid contains properties which can dissolve the paint. If clutch fluid gets on a painted surface, rinse with water immediately, then wipe the area dry.

1.  Remove the plate. (With plate) (See PLATE REMOVAL/INSTALLATION.)

2.  Remove the front crossmember under cover. (See FRONT CROSSMEMBER UNDER COVER REMOVAL/INSTALLATION.)

3.  Disconnect the clutch pipe No.2 from clutch release cylinder, and plug it to avoid clutch fluid leakage. (See CLUTCH PIPE AND HOSE REMOVAL/INSTALLATION.)

4.  Remove the clutch release cylinder.

amxuuw00004851

5.  Install the clutch release cylinder.

amxzzw00004023

6.  Connect the clutch pipe No.2 to clutch release cylinder. (See CLUTCH PIPE AND HOSE REMOVAL/INSTALLATION.)

7.  Bleed the air from the clutch system. (See CLUTCH FLUID REPLACEMENT/AIR BLEEDING.)

8.  Install the front crossmember under cover. (See FRONT CROSSMEMBER UNDER COVER REMOVAL/INSTALLATION.)

9.  Install the plate. (With plate) (See PLATE REMOVAL/INSTALLATION.)