REAR ROOF LINK MOTOR INSPECTION

id091600115100

1.  Apply battery positive voltage and connect the ground to rear roof link motor terminals A and E, and then inspect the rear roof link motor operation.

amxzzw00004215

•  If the rear roof link motor does not operate as indicated in the table, replace it. (See REAR ROOF LINK MOTOR REMOVAL/INSTALLATION.)

Caution

•  If the rear roof link motor temperature is high, the motor may not rotate due to the motor internal PTC function. Leave it untouched for about 3 min to cool it down, then reinspect.

Operation	Terminal
	E	A
Open	Ground	B+
Close	B+	Ground

2.  Connect the battery positive voltage to rear roof link motor terminal D and connect terminal B to ground.

3.  Operate the rear roof motor and measure the voltage at terminal F.

•  If there is any malfunction, replace the rear roof link motor. (See REAR ROOF LINK MOTOR REMOVAL/INSTALLATION.)