REAR ROOF LINK MOTOR REMOVAL/INSTALLATION

id091600105100

1.  Using the retractable hardtop switch, keep the rear roof open.

amxzzw00004110

2.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

3.  Remove the following parts:

(1)  Scuff plate (See SCUFF PLATE REMOVAL/INSTALLATION.)

(2)  Wind blocker (See WIND BLOCKER REMOVAL/INSTALLATION.)

(3)  Front seat back bar garnish (See SEAT BACK BAR GARNISH REMOVAL/INSTALLATION.)

(4)  Quarter trim (See QUARTER TRIM REMOVAL/INSTALLATION.)

(5)  Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

4.  Remove the seat belt retractor installation bolts and set aside the seat belt retractor. (See SEAT BELT REMOVAL/INSTALLATION.)

5.  Remove the side shelf and the rear side trim as a single unit. (See SIDE SHELF REMOVAL/INSTALLATION.)

6.  Remove the rear roof link assembly. (See REAR ROOF LINK ASSEMBLY REMOVAL/INSTALLATION.)

7.  Remove the band.

amxzzw00004628

8.  Remove the screws.

9.  Remove the rear roof link motor.

10.  Install in the reverse order of removal.