CONDENSER REMOVAL/INSTALLATION

id092000803000

1.  Using the retractable hardtop switch, keep the front roof half-open. (retractable hardtop)

amxzzw00004969

2.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

3.  Remove the wind blocker. (See WIND BLOCKER REMOVAL/INSTALLATION.)

4.  Partially peel back the side shelf (LH) and rear package trim to a position where the condenser is visible. (See SIDE SHELF REMOVAL/INSTALLATION.) (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)

5.  Disconnect the connector.

amxzzw00004593

6.  Remove the bolt.

7.  Remove the condenser.

8.  Install in the reverse order of removal.