i-ACTIVSENSE PERSONALIZATION FEATURES SETTING PROCEDURE

id152000001200

Caution
•  The personalization feature may not be set correctly if [Not Adopted.] is selected in the setting displayed on the M-MDS. Do not select [Not Adopted.] in the setting displayed on the M-MDS.

Smart City Brake Support [Forward] (SCBS F)


Using center display

•  For the setting procedure of the personalization features using the center display, refer to "CENTER DISPLAY PERSONALIZATION FEATURES". (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)


Advanced Smart City Brake Support (Advanced SCBS)


Using center display

•  For the setting procedure of the personalization features using the center display, refer to "CENTER DISPLAY PERSONALIZATION FEATURES". (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)


Lane Departure Warning System (LDWS)


Using M-MDS (LDWS timing or LDWS warning)

1.  Connect the M-MDS to the DLC-2.

2.  After vehicle identification, select the following from the M-MDS initialization screen.

(1)  “Module programming“
(2)  “Programmable Parameters”

3.  Select menu in the “FSC”.

4.  Select an item name, and than select option.

M-MDS display

Function

Setting contents

Control unit
LDWS Timing.
The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed.
Adaptive / Early / Medium / Late
Forward sensing camera (FSC)
LDWS Warning.
The warning operation sensitivity of the lane departure warning system (LDWS) can be changed.
Often / Medium / Rare
Forward sensing camera (FSC)


Using M-MDS (LDWS sound)

1.  Connect the M-MDS to the DLC-2.

2.  After vehicle identification, select the following from the M-MDS initialization screen.

(1)  “Module programming”
(2)  “Programmable Parameters”

3.  Select menu in the “IC”.

4.  Select an item name, and than select option.

M-MDS display

Function

Setting contents

Control unit
LDWS Sound.
The type of the LDWS warning alarm can be changed.
Beep /Rumble Strip
Instrument cluster
LDWS Volume
The volume of the LDWS warning alarm can be changed.
Volume 1 /Volume 2 /Volume 3
Instrument cluster


Using center display

•  For the setting procedure of the personalization features using the center display, refer to "CENTER DISPLAY PERSONALIZATION FEATURES". (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)


High Beam Control (HBC) System


Using M-MDS

1.  Connect the M-MDS to the DLC-2.

2.  After vehicle identification, select the following from the M-MDS initialization screen.

(1)  “Module programming“
(2)  “Programmable Parameters”

3.  Select menu in the “FSC”.

4.  Select an item name, and than select option.

M-MDS display

Function

Setting contents

Control unit
High Beam Control.
The high beam control (HBC) system can be switched between operable and inoperable.
OFF / ON
Forward sensing camera (FSC)


Using center display

•  For the setting procedure of the personalization features using the center display, refer to "CENTER DISPLAY PERSONALIZATION FEATURES". (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)


Adaptive Front Lighting System (AFS)


Using M-MDS

1.  Connect the M-MDS to the DLC-2.

2.  After vehicle identification, select the following from the M-MDS initialization screen.

(1)  “Module programming”
(2)  “Programmable Parameters”

3.  Select menu in the “IC”.

4.  Select an item name, and than select option.

M-MDS display

Function

Setting contents

Control unit
Adaptive Front-lighting System
The adaptive front lighting system (AFS) can be switched between operable and inoperable.
OFF / ON
Adaptive front lighting system (AFS) control module


Using center display

•  For the setting procedure of the personalization features using the center display, refer to "CENTER DISPLAY PERSONALIZATION FEATURES". (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)


Adaptive LED Headlights System


Using center display

•  For the setting procedure of the personalization features using the center display, refer to "CENTER DISPLAY PERSONALIZATION FEATURES". (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)


Blind Spot Monitoring (BSM) System


Using M-MDS

1.  Connect the M-MDS to the DLC-2.

2.  After vehicle identification, select the following from the M-MDS initialization screen.

(1)  “Module programming”
(2)  “Programmable Parameters”

3.  Select menu in the “IC”.

4.  Select an item name, and than select option.

M-MDS display

Function

Setting contents

Control unit
BSM Volume.
The volume of the blind spot monitoring (BSM) warning alarm can be changed.
OFF / Low / High
Instrument cluster


Using center display

•  For the setting procedure of the personalization features using the center display, refer to "CENTER DISPLAY PERSONALIZATION FEATURES". (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)


Driver Attention Alert


Using center display

•  For the setting procedure of the personalization features using the center display, refer to "CENTER DISPLAY PERSONALIZATION FEATURES". (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)


Traffic Sign Recognition System (TSR)


Using center display

•  For the setting procedure of the personalization features using the center display, refer to "CENTER DISPLAY PERSONALIZATION FEATURES". (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)