MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR INSPECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0]

MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR INSPECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0]

id0140g8800900

Voltage Inspection

1. Connect the M-MDS to the DLC-2.

2. Switch the ignition ON (engine off).

3. Verify that the MAP sensor output voltage (PID: MAP_V) is within the specification. (See ON-BOARD DIAGNOSTIC TEST [PCM (SKYACTIV-G 1.5, SKYACTIV-G 2.0)].) (See PCM INSPECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0].)

• If not as specified, replace the MAP sensor/IAT sensor No.2. (See MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO.2 REMOVAL/INSTALLATION [SKYACTIV-G 1.5, SKYACTIV-G 2.0].)

Specification (Reference)

amxzzw00003556