INTAKE AIR TEMPERATURE (IAT) SENSOR INSPECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0]

id0140g8802200


IAT Sensor No.1


Resistance inspection

Note
•  The IAT sensor No.1 is built into the MAF sensor. When replacing the IAT sensor No.1, replace the MAF sensor/IAT sensor No.1.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2.  Disconnect the MAF sensor/IAT sensor No.1 connector.

3.  Measure the resistance between MAF sensor/IAT sensor No.1 terminals A and B.

ac5wzw00000281

•  If not as specified, replace the MAF sensor/IAT sensor No.1. (See MASS AIR FLOW (MAF) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO.1 REMOVAL/INSTALLATION [SKYACTIV-G 1.5, SKYACTIV-G 2.0].)

Specification (Reference)

IAT (°C {°F})

Resistance (Kilohms)
−20 {−4}
Approx. 15.1
20 {68}
Approx. 2.64
60 {140}
Approx. 0.66

amxzzw00003558


IAT Sensor No.2


Resistance inspection

Note
•  The IAT sensor No.2 is built into the MAP sensor. When replacing the IAT sensor No.2, replace the MAP sensor/IAT sensor No.2.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2.  Remove the following parts:

(1)  Wiper arm (See WIPER ARM AND BLADE REMOVAL/INSTALLATION.)
(2)  Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION.)
(3)  Front suspension tower bar (Vehicles with front suspension tower bar) (See FRONT SUSPENSION TOWER BAR REMOVAL/INSTALLATION.)
(4)  Air box complete (See AIR BOX COMPLETE REMOVAL/INSTALLATION.)

3.  Disconnect the MAP sensor/IAT sensor No.2 connector.

4.  Remove the screw. (See MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO.2 REMOVAL/INSTALLATION [SKYACTIV-G 1.5, SKYACTIV-G 2.0].)

5.  Remove the MAP sensor/IAT sensor No.2. (See MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO.2 REMOVAL/INSTALLATION [SKYACTIV-G 1.5, SKYACTIV-G 2.0].)

6.  Measure the resistance between MAP sensor/IAT sensor No.2 terminals A and B.

am3uuw00007218

•  If not as specified, replace the MAP sensor/IAT sensor No.2. (See MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO.2 REMOVAL/INSTALLATION [SKYACTIV-G 1.5, SKYACTIV-G 2.0].)

Specification (Reference)

IAT (°C {°F})

Resistance (Kilohms)
0 {32}
Approx. 5.9
20 {68}
Approx. 2.5
80 {176}
Approx. 0.323
130 {266}
Approx. 0.0893

amxzzw00003559