DTC B1DA1:74 [RETRACTABLE HARDTOP CONTROL MODULE]

id0902r4076600

Description

Top lock motor operation time-out

Detection condition

•  The retractable hardtop control module detects that the top lock motor is operating for 10 s or more.

Fail-safe

•  Stops retractable hardtop operation

Possible cause

•  Retractable hardtop control module malfunction

•  Poor top lock motor installation

•  Top lock motor malfunction

System wiring diagram

Not applicable

Description	Top lock motor operation time-out
Detection condition	• The retractable hardtop control module detects that the top lock motor is operating for 10 s or more.
Fail-safe	• Stops retractable hardtop operation
Possible cause	• Retractable hardtop control module malfunction • Poor top lock motor installation • Top lock motor malfunction
System wiring diagram	Not applicable

Diagnostic Procedure

Step	Inspection		Action
1	VERIFY OTHER RETRACTABLE HARDTOP CONTROL MODULE DTCs • Clear the DTC for the retractable hardtop control module using the M-MDS. (See CLEARING DTC [RETRACTABLE HARDTOP CONTROL MODULE].) • Retrieve the retractable hardtop control module DTCs using the M-MDS. (See DTC INSPECTION [RETRACTABLE HARDTOP CONTROL MODULE].) • Is the DTCs U3000:44/U3000:45/U3000:49 displayed?	Yes	Replace the retractable hardtop control module, then go to Step 4. (See RETRACTABLE HARDTOP CONTROL MODULE REMOVAL/INSTALLATION.)
1		No	Go to the next step.
2	DETERMINE IF MALFUNCTION CAUSE IS POOR TOP LOCK MOTOR INSTALLATION • Verify that the top lock motor is installed to the correct position. • Is the top lock motor installed to the correct position?	Yes	Go to the next step.
2		No	Install the top lock motor to the correct position, then go to Step 4. (See TOP LOCK MOTOR REMOVAL/INSTALLATION.)
3	INSPECT TOP LOCK MOTOR • Inspect the top lock motor. (See TOP LOCK MOTOR INSPECTION.) • Is the top lock motor normal?	Yes	Go to the next step.
3		No	Replace the top lock motor , then go to the next step. (See TOP LOCK MOTOR REMOVAL/INSTALLATION.)
4	VERIFY THAT REPAIRS HAVE BEEN COMPLETED • Clear the DTC for the retractable hardtop control module using the M-MDS. (See CLEARING DTC [RETRACTABLE HARDTOP CONTROL MODULE].) • Retrieve the retractable hardtop control module DTCs using the M-MDS. (See DTC INSPECTION [RETRACTABLE HARDTOP CONTROL MODULE].) • Is the same DTC displayed?	Yes	Repeat the inspection from Step 1. • If the malfunction recurs, replace the retractable hardtop control module. (See RETRACTABLE HARDTOP CONTROL MODULE REMOVAL/INSTALLATION.) Go to the next step.
4		No	Go to the next step.
5	VERIFY IF OTHER DTCs DISPLAYED • Are any other DTCs displayed?	Yes	Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [RETRACTABLE HARDTOP CONTROL MODULE].)
5		No	DTC troubleshooting completed.