TOP LOCK STRIKER INSPECTION

id091600030300

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2.  Remove the following parts:

(1)  A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(2)  Female wedge (See FEMALE WEDGE REMOVAL/INSTALLATION.)

(3)  Front header trim (See FRONT HEADER TRIM REMOVAL/INSTALLATION.)

3.  Verify that the continuity is as indicated in the table.

amxuuw00004183

amxuuw00004184

•  If not as indicated in the table, replace the top lock striker. (See TOP LOCK STRIKER REMOVAL/INSTALLATION.)