ACCESSORY SOCKET SHORT-CORD INSPECTION
id092100002300
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the following parts:
- (1) Passenger-side scuff plate (See SCUFF PLATE REMOVAL/INSTALLATION.)
- (2) Passenger-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
- (3) Passenger-side A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)
- (4) Passenger-side lower panel (See PASSENGER-SIDE LOWER PANEL REMOVAL/INSTALLATION.)
- (5) Accessory socket (See ACCESSORY SOCKET REMOVAL/INSTALLATION.)
3. Verify that the continuity between the accessory socket short-cord terminals is as indicated in the table.
-