NO.3 i-stop INDICATOR LIGHT (GREEN) FLASHES [SKYACTIV-G 1.5, SKYACTIV-G 2.0]


id1103q7000800

3

i-stop INDICATOR LIGHT (GREEN) FLASHES

DESCRIPTION
•  i-stop indicator light (green) remains flashing during idling. (AT, Except for European (L.H.D. U.K.) specs.)
•  i-stop indicator light (green) remains flashing during i-stop.
POSSIBLE CAUSE
Note
•  If the brake pedal depression is insufficient, the i-stop indicator light (green) illuminates and the i-stop function operates by increasing brake pedal depression. (AT, Except for European (L.H.D. U.K.) specs.)
•  If in gear while i-stop is operating, the i-stop indicator light (green) flashes continuously. (MT)
•  If the driver’s door is open while i-stop is operating, the i-stop warning light (green) flashes continuously. (European (L.H.D. U.K.) specs.)
i-stop function operation conditions are not set
•  False detection of insufficient brake depression (fluid pressure). (AT, Except for European (L.H.D. U.K.) specs.)
―  Brake fluid pressure sensor (built-into DSC HU/CM) malfunction

Diagnostic Procedure

STEP

INSPECTION

RESULTS

ACTION

1
VERIFY DTC
•  Retrieve the PCM and DSC HU/CM DTCs using the M-MDS.
•  Are any DTCs present?
Yes
Go to the applicable DTC inspection.
No
AT:
•  Go to the next step.
MT:
•  Go to Step 3.
2
INSPECT BRAKE FLUID PRESSURE SENSOR
•  Inspect the brake fluid pressure sensor.
•  Is there any malfunction?
Yes
Replace the DSC HU/CM.
No
Repeat the inspection from Step 1.
•  If the malfunction is not resolved, replace the PCM.
Go to the next step.
3
Verify the test results.
•  If normal, return to the diagnostic index to service any additional symptoms.
•  If a malfunction remains, inspect the related Service Information and perform the repair or diagnosis.
―  If the vehicle is repaired, troubleshooting is completed.
―  If the vehicle is not repaired or additional diagnostic information is not available, replace the PCM.