BELTLINE MOLDING REMOVAL/INSTALLATION

id091600807300

1.  Remove the following parts:

(1)  Console (See CONSOLE REMOVAL/INSTALLATION.)

(2)  Quarter trim (See QUARTER TRIM REMOVAL/INSTALLATION.)

(3)  Scuff plate (See SCUFF PLATE REMOVAL/INSTALLATION.)

(4)  Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

(5)  Aeroboard (See AEROBOARD REMOVAL/INSTALLATION.)

(6)  Front seat back bar garnish (See SEAT BACK BAR GARNISH REMOVAL/INSTALLATION.)

(7)  Back trim (See BACK TRIM REMOVAL/INSTALLATION.)

(8)  Seat belt set plate (See SEAT BELT REMOVAL/INSTALLATION.)

(9)  Seat back crossmember assembly (See SEAT BACK CROSSMEMBER ASSEMBLY REMOVAL/INSTALLATION.)

(10)  Rear side trim (See REAR SIDE TRIM REMOVAL/INSTALLATION.)

(11)  Rear package trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)

(12)  Side shelf (See SIDE SHELF REMOVAL/INSTALLATION.)

(13)  Seat belt upper anchor installation bolt (See SEAT BELT REMOVAL/INSTALLATION.)

(14)  Convertible top (See CONVERTIBLE TOP REMOVAL/INSTALLATION.)

2.  Remove the fasteners.

e5u916zw5005

3.  Remove the beltline protector.

4.  Remove the nut and bolts.

5.  Remove the beltline molding.

6.  Install in the reverse order of removal.