ANTENNA FEEDER NO.1 REMOVAL/INSTALLATION
id092000812200
1. Remove the battery cover.
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [L8, LF].)
3. Remove the following parts:
- (1) Console (See CONSOLE REMOVAL/INSTALLATION.)
- (2) Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)
- (3) Side wall (See SIDE WALL REMOVAL/INSTALLATION.)
- (4) Console panel (See CONSOLE PANEL REMOVAL/INSTALLATION.)
- (5) Center panel unit (See CENTER PANEL UNIT REMOVAL/INSTALLATION.)
- (6) Lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)
- (7) Column cover (See COLUMN COVER REMOVAL/INSTALLATION.)
- (8) Driver-side air bag module (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)
- (9) Steering wheel (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)
- (10) Combination switch (See COMBINATION SWITCH REMOVAL/INSTALLATION.)
- (11) Steering shaft (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)
- (12) Meter hood (See METER HOOD REMOVAL/INSTALLATION.)
- (13) Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
- (14) Side panel (See SIDE PANEL REMOVAL/INSTALLATION.)
- (15) Bonnet release lever (See BONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION.)
- (16) Female wedge (See CONVERTIBLE TOP DISASSEMBLY/ASSEMBLY.)
- (17) A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)
- (18) Scuff plate (See SCUFF PLATE REMOVAL/INSTALLATION.)
- (19) Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
- (20) Fuse box No.1
- (21) Dashboard (See DASHBOARD REMOVAL/INSTALLATION.)
4. Remove clips A and B.
5. Disconnect the connector.
6. Remove the antenna feeder No.1.
7. Install in the reverse order of removal.
L.H.D.
R.H.D.
