FUEL INJECTOR INSPECTION [MZ-CD 1.4 DI Turbo]

id0114z1800700

Visual Inspection

1.  Remove the fuel injector. (See FUEL INJECTOR REMOVAL/INSTALLATION [MZ-CD 1.4 DI Turbo].)

2.  Verify that there are no metal shavings on the fuel injector.

3.  Visually inspect the fuel injector for the following:

•  Damage

•  Cracks

•  Rusted sensor terminal

•  Bent sensor terminal

―  If there is any malfunction, replace the fuel injector. (See FUEL INJECTOR REMOVAL/INSTALLATION [MZ-CD 1.4 DI Turbo].)

4.  Install the fuel injector. (See FUEL INJECTOR INSPECTION [MZ-CD 1.4 DI Turbo].)

Resistance Inspection

1.  Turn the engine switch to the LOCK position.

2.  Disconnect the negative battery cable.

3.  Disconnect the fuel injector connector.

4.  Inspect the resistance between fuel injector terminals A and B using a tester.

am2zzw00003182

•  If not within the specification, replace the fuel injector. (See FUEL INJECTOR REMOVAL/INSTALLATION [MZ-CD 1.4 DI Turbo].)