NEUTRAL SWITCH REMOVAL/INSTALLATION [F35M-R]
id0515a1800700
AutoAlliance Thailand (AAT) manufactured vehicles
1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [ZJ, ZY].)
2. Drain the oil from the transaxle. (See TRANSAXLE OIL REPLACEMENT [F35M-R].)
3. Disconnect the neutral switch connector and remove the neutral switch.
am2zzw00005145
|
4. Install the neutral switch (with a new gasket) to the transaxle case.
5. Connect the neutral switch connector.
6. Add the specified amount and type of oil. (See TRANSAXLE OIL REPLACEMENT [F35M-R].)
7. Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [ZJ, ZY].)
Except AutoAlliance Thailand (AAT) manufactured vehicles
1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [ZJ, ZY].)
2. Drain the oil from the transaxle. (See TRANSAXLE OIL REPLACEMENT [F35M-R].)
3. Remove the bolt A, B.
am2zzw00000202
|
4. Loosen bolt C and slide engine mount No.1 as shown in the figure.
5. Remove the neutral switch.
am2zzw00005146
|
6. Install the neutral switch (with a new gasket) to the transaxle case.
7. Tighten the bolt A, B.
am2zzw00000204
|
8. Tighten the bolt C.
9. Add the specified amount and type of oil. (See TRANSAXLE OIL REPLACEMENT [F35M-R].)
10. Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [ZJ, ZY].)