SECONDARY PULLEY SPEED SENSOR REMOVAL/INSTALLATION [DJVA-EL]

id051901286900

1.  Remove the secondary pulley speed sensor.

(1)  Disconnect the negative battery cable.

(2)  Remove the battery component (ex: battery, battery tray). (See BATTERY REMOVAL/INSTALLATION [ZJ, ZY].)

(3)  Disconnect the secondary pulley speed sensor connector.

(4)  Remove the secondary pulley speed sensor.

adejjw00002819

(5)  Remove the O-ring.

2.  Install in the secondary pulley speed sensor.

(1)  Coat a new O-ring with CVT fluid, and install it to the secondary pulley speed sensor.

(2)  After verifying the sensor condition, install the secondary pulley speed sensor.

am3zzw00008505

Tightening torque

3.9—6.9 N·m {40—70 kgf·cm, 35—61 in·lbf}

(3)  Connect the secondary pulley speed sensor connector.

3.  Install the battery component (ex: battery, battery tray). (See BATTERY REMOVAL/INSTALLATION [ZJ, ZY].)

4.  Connect the negative battery cable.