REAR HEAT DUCT REMOVAL/INSTALLATION

id071100800900

Driver-side

1.  Slide the front seat rearward.

2.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

3.  Remove the following parts:

(1)  Driver-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(2)  Driver-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(3)  Driver-side side wall (See SIDE WALL REMOVAL/INSTALLATION.)

(4)  Joint cover (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)

(5)  Accelerator pedal (See ACCELERATOR PEDAL REMOVAL/INSTALLATION [SKYACTIV-G 1.3, SKYACTIV-G 1.5].)(See ACCELERATOR PEDAL REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

4.  Remove the fastener.

ac3wzw00000875

5.  Turn the floor covering over.

6.  Remove the fastener.

ac3wzw00000876

7.  Remove the rear heat duct.

8.  Install in the reverse order of removal.

Passenger-side

1.  Slide the front seat rearward.

2.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

3.  Remove the following parts:

(1)  Passenger-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(2)  Passenger-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(3)  Passenger-side side wall (See SIDE WALL REMOVAL/INSTALLATION.)

(4)  Passenger-side front heat duct (See FRONT HEAT DUCT REMOVAL/INSTALLATION.)

4.  Remove the fastener.

ac3wzw00000877

5.  Turn the floor covering over.

6.  Remove the fastener.

ac3wzw00000878

7.  Remove the rear heat duct.

8.  Install in the reverse order of removal.