SUPPLIER IDENTIFICATION PROCEDURE [AUDIO]

id0902f6803800

Note

•  The supplier varies depending on the units. When asking the supplier (service center) for repair or replacement, identify the supplier and fill in the Audio Repair Order Form using the following procedures.

Identification With The Label

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2.  Remove the audio panel No.1. (See AUDIO PANEL No.1 REMOVAL/INSTALLATION.)

3.  Remove the audio panel No.2. (See AUDIO PANEL No.2 REMOVAL/INSTALLATION.)

4.  Remove the audio unit. (See AUDIO UNIT REMOVAL/INSTALLATION.)

5.  Verify the supplier name by referring to the label attached to the unit.

am2zzw00010738

Verify Using The Diagnostic Assist Function

1.  Switch the ignition to ACC or ON (engine off or on).

2.  While pressing the POWER/VOLUME button, press Preset button 5 for 3 s or more.

am2zzw00010739

3.  Identify the supplier code by referring to the display.

am2zzw00010740

Supplier code	Supplier name
01	SANYO Automedia
02	Panasonic
03	Clarion
04	Pioneer
05	VISTEON
06	DESAY

Note

•  DTCs can also be identified from the DTC displays screen.

am2zzw00010741

4.  Switch the ignition off to end the diagnostic assist function.