DTC U0405:00 [ACTIVE DRIVING DISPLAY]
id0902r2997600
|
Description |
Error signal received from radar unit |
|---|---|
|
Detection condition
|
• The active driving display receives the error signal from the radar unit for the ignition switched ON (engine off or on).
|
|
Fail-safe
|
—
|
|
Possible cause
|
• DTCs are stored in the radar unit.
• Radar unit malfunction
• Active driving display malfunction
|
|
System wiring diagram
|
—
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY RADAR UNIT DTCs
• Retrieve the radar unit DTCs using the M-MDS.
(See DTC INSPECTION [RADAR UNIT].)
• Are any DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [RADAR UNIT].)
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY IF MALFUNCTIONING LOCATION IS RADAR UNIT DEPENDING ON REPEATABILITY
• Clear the DTC for the active driving display using the M-MDS.
• Switch the ignition ON (engine off or on) and wait for 20 s or more.
• Retrieve the active driving display DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Replace the radar unit, then go to the next step.
|
|
No
|
Go to Step 4.
|
||
|
3
|
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
• Clear the DTC for the active driving display using the M-MDS.
• Switch the ignition ON (engine off or on) and wait for 20 s or more.
• Retrieve the active driving display DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Replace the active driving display, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|
||