HEEL CUSHION REMOVAL/INSTALLATION

id091700606000

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2.  Remove the following parts:

(1)  Driver-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(2)  Driver-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(3)  Driver-side side wall (See SIDE WALL REMOVAL/INSTALLATION.)

(4)  Accelerator pedal (See ACCELERATOR PEDAL REMOVAL/INSTALLATION [SKYACTIV-G 1.3, SKYACTIV-G 1.5].) (See ACCELERATOR PEDAL REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

(5)  Joint cover (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)

3.  Partially peel back the floor covering.

4.  Remove the fastener.

am2zzw00012633

5.  Pull the heel cushion in the direction of the arrow and remove it.

am2zzw00012634

6.  Install in the reverse order of removal.