1. Remove the trunk board.
2. Remove in the order indicated in the table.
|
1
|
Screw A
|
|
2
|
Fastener
|
|
3
|
Screw B
|
|
4
|
Nut A
|
|
5
|
Nut B
|
|
6
|
Rear bumper
(See Rear Bumper Removal Note)
|
3. Install in the reverse order of removal.
1. Pull the rear bumper ends (wheel arch) outward in numerical order to disengage from the rear bumper retainer.
2. Remove the rear bumper from the body.
1. Spread the rear bumper ends (wheel arches) apart.
2. Attach the rear bumper to the body.
3. Engage the rear bumper fascia and the splash shield.
4. Press the rear bumper connecting area into the body to engage with the rear bumper retainer.
