HEATED OXYGEN SENSOR (HO2S) REMOVAL/INSTALLATION [ZJ, ZY]

id0140c4804000

1.  Disconnect the negative battery cable.

2.  Remove the air cleaner cover. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [ZJ, ZY].)

3.  Remove the HO2S using the SST.

adejjw00000668

4.  Install in the reverse order of removal.

HO2S tightening torque
29—49 N·m {3.0—4.9 kgf·m, 22—35 ft·lbf}