DTC U3000:47/U3000:48/U3000:49 [DYNAMIC STABILITY CONTROL (DSC)]

id0402b2877700

DTC
U3000:47, U3000:48, U3000:49
DSC HU/CM (internal malfunction)
DETECTION CONDITION
•  The DSC CM on-board diagnostic function detects control module internal malfunction.
POSSIBLE CAUSE
•  DSC HU/CM internal malfunction

Diagnostic procedure

STEP

INSPECTION

ACTION
1
VERIFY NO DSC HU/CM MALFUNCTION
•  Clear the DTCs from the memory.
•  Start the engine and drive the vehicle at 10km/h {6.2 mph} or more.
•  Are the same DTCs present?
Yes
Replace the DSC CM, then go to the next step.
(See DSC HU/CM REMOVAL/INSTALLATION [L.H.D.].)
(See DSC HU/CM REMOVAL/INSTALLATION [R.H.D.].)
No
Go to the next step.
2
VERIFY THAT NO OTHER DTCS ARE PRESENT
•  Are any other DTCs output?
Yes
Go to the applicable DTC inspection.
(See ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)].)
No
DTC troubleshooting completed.