DTC U2100:00 [DYNAMIC STABILITY CONTROL (DSC)]
id0402b2878800
|
DTC
|
U2100:00
|
Configuration data not recorded
|
|
|
DETECTION CONDITION
|
• DSC CM detects configuration data not record or data error
|
||
|
POSSIBLE CAUSE
|
• DSC CM malfunction.
|
||
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
VERIFY THAT THE SAME DTC IS NOT PRESENT
• Clear the DTCs from the memory.
• Turn the ignition switch to the off.
• Turn the ignition switch to the ON position, and maintain this condition for approx. 30 s.
• Are the same DTCs present?
|
Yes
|
Replace the DSC CM, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY THAT NO OTHER DTCS ARE PRESENT
• Are any other DTCs output?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||