NO.9 ABNORMAL SHIFTING
id050300801400
9
|
Abnormal shifting
|
DESCRIPTION
|
• Shift incorrectly (incorrect shift pattern).
|
POSSIBLE CAUSE
|
• There is a malfunction in the signal circuit which controls shifting (accelerator pedal position sensor, TP sensor, input/turbine speed sensor, vehicle speed sensor), the control valve is stuck, the accumulator (forward or servo apply) is stuck, or the clutch circuit is stuck.
|
Diagnostic procedure
STEP |
INSPECTION |
ACTION |
|
---|---|---|---|
1
|
Disconnect PCM Is resistance between GND terminal at PCM connector and body GND less than 5.0 ohms?
|
Yes
|
Go to next step.
|
No
|
Repair open GND circuit. Reconnect PCM.
|
||
2
|
Check the value at the following PIDs using the M-MDS.
(See PCM INSPECTION [ZJ, ZY].)
• APP
• TP
• TSS
• VSS
Are PID values okay?
|
Yes
|
Overhaul control valve body and repair or replace any defective parts.
If problem remains, overhaul transaxle and repair or replace any defective parts.
|
No
|
Repair or replace any defective parts.
|
||
3
|
• Verify test results.
|